Panasonic CF-51 Series

86
Setup Utility
*1
This item is displayed only when [Parallel Port] is set to [Enable].
*2
[Disable] is automatically set when [LAN] is set to [Disable]. This function works only for the internal
LAN. This does not work for a wireless LAN nor a LAN card.
NOTE
z When the Setup Utility is started up with the User Password;
• [Set Supervisor Password] and [Hard Disk Lock] will not be displayed.
• [Password on boot], [Setup Utility Prompt], [Boot First Menu], [User Password
Protection], [MP Floppy Operation] and [Legacy USB Support] will be displayed, but
cannot be set.
Modem Disable
Enable
LAN Disable
Enable
Boot up from LAN
*2
Disable
Enable
Wireless LAN Disable
Enable
Security Menu
Password on boot: [Enable]
XSet Supervisor Password: [Enter]
Setup Utility Prompt: [Enable]
Boot First Menu: [Enable]
Hard Disk Lock: [Disable]
User Password Protection: [No Protection]
XSet User Password: [Enter]
MP Floppy Operation: [Enable]
Legacy USB Support: [Enable]