39
Setup Utility
Running the Setup Utility
1 Turn on or restart the computer
2 Press F2 while [Press F2 to enter SETUP] is displayed soon
after the computer begins the startup procedure
(If you fail to press F2 at this time, restart your computer.)
If [Enter Password] is displayed
Enter your password.
(The Supervisor Password must be entered to change items of the [Advanced]
menu. When a user name and password are entered, the “Advanced” menu
contents and some parts of the “Security” menu cannot be changed.)
For more details, on-line help is available; press F1 .
To close the Setup Utility, refer to page 43.
NOTE
Key Operations
F1 :To display the corresponding “help” file.
Enter :To display sub-menu.
Esc :To display [Exit] menu.
:To move among the menus.
:To move among the items.
F5 F6 :To move among the values.
F9 :To set default settings.
(When starting up the Setup Utility with the User Password, this key is not
available.)
F10 :To save the settings and exit.
To Next Page
Loading...
