101
Flash Memory Data Erase Utility
4 Press
Fn
+
B
(F10)
z At the confirmation message, select [Yes] and press (Enter).
z The computer will restart.
5 When [Panasonic] boot screen displays, press and hold
Fn
+
U
(F2) or
Fn
+ (Del) .
z If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User
Password.
6 Set the Product Recovery DVD-ROM into the CD/DVD drive.
7 Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].
8 Press (Enter).
z The computer will restart.
z If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User
Password.
9 Click [Erase the whole data on the Hard Disk for security] and click [Next].
10 At the confirmation message, click [YES].
11 Click [Continue].
12 Click [Continue] again.
13 Click [YES].
Erasing the flash memory data starts.
14 After erasing is completed, remove the Product Recovery DVD-ROM and click [OK].
To Next Page
Loading...
