Panasonic CF-U1 series - Troubleshooting (Advanced); Shut down

104
Troubleshooting (Advanced)
Refer to the following instructions when a problem occurs. If the remedies indicated in the chart do not solve the problem,
contact Panasonic Technical Support. For a software problem, refer to the instruction manual of the software.
• To check the computer’s usage status (Î page 113).
 Shut Down
Cannot shut down or restart Windows. z Remove USB devices.
z It may take 1 or 2 minutes to shut down.
 Sleep or Hibernation
Cannot enter sleep or hibernation. z Remove USB devices temporarily. If the problem persists, restart the computer.
z It may take 1 or 2 minutes to enter sleep or hibernation.
z The computer does not enter sleep or hibernation immediately after resuming.
Wait approximately 1 minute.
Cannot enter sleep or hibernation
automatically.
z Disconnect peripheral devices.
z If you connect to a network using wireless LAN function, perform access point
settings (Î page 83).
z If you do not use wireless LAN function, turn off wireless LAN function (Î page
82).
z Make sure that you are not using any software that regularly accesses the flash
memory.
 Display
Takes time to display [Power Options]
screen.
z With the following steps, confirm whether [Copy of Panasonic Power Manage-
ment] created when the Power Saving Utility is made has become 100 and
more or not.
A
Click or on the notification area and click [More power options].
B Click [Show additional plans].
When more than one [Copy of Panasonic Power Management] is displayed,
click [Change plan settings] in the power plan to be deleted and click [Delete
this plan] to delete.
 Sound
No sound.
z Press
Fn + A () or Fn + S ( ) to cancel mute.
*1
z Restart the computer.
*1
For Numeric keyboard model : Fn + ( ) or Fn + 7 ()