Panasonic CF-U1 series - Security Menu

92
Setup Utility
Underlined items are the factory presets.
*4
<For Numeric keyboard model>
Only Numeric keyboard can be used even if the USB keyboard is connected.
Security Menu
Boot Prompt Configuration
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disabled], the message “Press F2 for Setup” is not
displayed on [Panasonic] boot screen. However
U (F2) and will work even if the message is not
displayed.
Disabled
Enabled
Password on Boot
*4
Disabled
Enabled
Set Supervisor Password
*4
Enter the sub-menu.
Hard Disk Lock
• Can be changed only when [Set Supervisor Password] is set.
Disabled
Enabled
User Password Protection No Protection
Protected
Set User Password
*4
• Can be changed only when [Set Supervisor Password] is set.
Enter the sub-menu.
XEmbedded Security (TPM)
• For information on TPM, refer to the Installation Manual of “Trusted Platform Module (TPM)”.
Click (Start), input [c:\util\drivers\tpm\readme.pdf
] in [Search programs and files], and press
(Enter).
Enter the sub-menu.
XFingerprint Security
• Only for model with Fingerprint Reader
Enter the sub-menu.