75
External Display
CAUTION
z
Before disconnecting the external display, switch to the internal LCD by pressing
+
P
*3
or
Fn
+
E
()
*4
. Oth-
erwise the displayed image quality may become different after disconnection (e.g., wrong resolution). In this case,
press +
P
*3
or
Fn
+
E
()
*4
to reset the image quality.
z The screen may become distorted due to the following operations. In this case, restart the computer.
• Disconnecting an external display for which you have set high resolution or high refresh rate.
• Connecting/disconnecting an external display during computer operations.
*3
For Numeric keyboard model : +
3
*4
For Numeric keyboard model :
Fn
+
4
()
1 Press +
P
*5
or
Fn
+
E
()
*6
.
2 Click the Display mode.
You can switch the display mode by pressing +
P
*5
or
Fn
+
E
()
*6
.
NOTE
z Until Windows startup is completed (during Setup Utility, etc.), the simultaneous display cannot be used and pressing
Fn
+
E
()
*6
switches the display between the internal LCD and the external display.
*5
For Numeric keyboard model : +
3
*6
For Numeric keyboard model :
Fn
+
4
()
Switching the Display
To Next Page
Loading...
Need help?
General