AIR SWING
TIMER
CLOCK
1
2
3
CO
O
L
MODE
ECONOMY
FAN SPEED
AUTO
MANUAL
ON OFF
CANCEL
SLEEP
SET
POWERFUL
OFF/ON
COOL
TEMP
HOW TO OPERATE
● Automatic, Cooling, Soft Dry, Fan
Display
Close the Cover
a
FAN
DRY
COOL
HI
AUTO
AUTO
LO
AUTO
a – Automatic Operation
• At the start of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected
according to the indoor temperature.
• The operation mode changes every hour, when
necessary.
• Temperature is not displayed on remote control during
Auto mode operation.
■ Operation details
Cooling Operation
• To set room temperature to your preference of cooling
comfort.
Setting
temperature
Soft Dry operation with Low
fan speed
Switch to Soft Dry when setting temperature is
reached.
Cooling
Operation
DRYCOOL
COOL
– Soft Dry Operation
• A very gentle Cooling Operation. Consisting primarily of
dehumidifying. It does not lower the room temperature.
• During Soft Dry operation, the indoor fan operates at Low fan
speed.
DRY
1 Press to select the desired operation mode
When pressed, the display changes in this order.
2 Press to start the operation
POWER indicator LED (Green) on indoor unit will light up.
Press once more to stop operation.
3 Press to select room temperature
• a Automatic Operation
Display
- Operation with 2°C higher than standard temperature.
- Operation with standard temperature.
- Operation with 2°C lower than standard temperature.
• Heating, Cooling, Soft Dry operation
Press to increase temperature by 1°C.
Press to decrease temperature by 1°C.
– The temperature can be set between 16°C and 30°C.
– Recommended temperature
For Heating: 20°C - 24°C.
For Cooling: 26°C - 28°C.
For Soft Dry: 1°C - 2°C lower than room temperature.
HEAT
42
S-A75KE CU-A75KE / CS-A95KE CU-A95KE / CS-A125KE CU-A125KE
To Next Page
Loading...
Need help?
General
