What to do if my Panasonic Air Conditioner shows indoor high pressure protection?
If your Panasonic Air Conditioner displays an indoor high-pressure protection error, check if the air filter is dirty or if there's a short circuit affecting air circulation. Clean the air filter or clear any obstructions to ensure proper airflow.
Why is my Panasonic Air Conditioner showing IPM overheating protection?
If your Panasonic Air Conditioner shows IPM (power transistor) overheating protection, it could be due to excess refrigerant or improper heat radiation. Also, check the IPM (Power transistor) itself.
What causes total running current protection in Panasonic CS-E18HKEW Air Conditioner?
If your Panasonic Air Conditioner is showing total running current protection, the issue might be due to excess refrigerant or improper heat radiation. Ensure that the refrigerant levels are correct and that the unit can dissipate heat effectively.
What to do if Panasonic Air Conditioner displays indoor heat exchanger anti-freezing protection?
If your Panasonic Air Conditioner displays an indoor heat exchanger anti-freezing protection error, this may be due to insufficient refrigerant or a dirty air filter. Check the refrigerant levels and clean the air filter.
Why is my Panasonic Air Conditioner's outdoor compressor overheating?
If your Panasonic Air Conditioner's outdoor compressor is overheating, it may be caused by insufficient refrigerant or an issue with the compressor itself. Check the refrigerant levels and inspect the compressor.
How to fix outdoor fan motor lock abnormality in Panasonic CS-E18HKEW?
If your Panasonic Air Conditioner displays an outdoor fan motor lock abnormality, check the outdoor PCB and the outdoor fan motor.
What to do for outdoor compressor abnormal revolution in Panasonic CS-E18HKEW?
If your Panasonic Air Conditioner is experiencing outdoor compressor abnormal revolution, check the outdoor compressor.
What to do if Panasonic CS-E18HKEW displays outdoor air temperature sensor abnormality?
If your Panasonic Air Conditioner shows an abnormality with the outdoor air temperature sensor, check the outdoor temperature sensor for defects or disconnections.
What to do if Panasonic CS-E18HKEW Air Conditioner displays indoor heat exchanger temperature sensor abnormality?
If your Panasonic Air Conditioner displays an abnormality with the indoor heat exchanger temperature sensor, check the heat exchanger temperature sensor for defects or disconnections.
What to do if Panasonic CS-E18HKEW Air Conditioner displays outdoor compressor temperature sensor abnormality?
If your Panasonic Air Conditioner displays an abnormality with the outdoor compressor temperature sensor, check the compressor temperature sensor for defects or disconnections.
Read safety precautions carefully before servicing. Electrical work must be done by licensed electricians.
Provides guidelines for selecting optimal locations for indoor and outdoor units.
Covers connecting piping, flaring, and connecting cables for installation.
Details equipment evacuation and connecting cables to the outdoor unit.
Explains inverter control, temp settings, and thermostat functions for cooling, dry, heating.
Covers time delay safety, forced operation, and current/IPM protection controls.
Details protection against overload, dew formation, and freezing during cooling/soft dry.
Covers refrigeration cycle diagnosis, error codes, and self-diagnosis functions.
Provides step-by-step instructions for disassembling indoor unit components.
General| Type | Split System |
|---|---|
| Cooling Capacity | 5.0 kW |
| Heating Capacity | 6.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
To Next Page