105
17.3.2 RESET (RC)
To clear and restore the remote control setting to factory default.
o Press once to clear the memory
17.3.3 RESET (RC)
To restore the unit’s setting to factory default.
o Press once to restore the unit’s setting.
17.3.4 TIMER
To change indoor unit indicators’ intensity:
o Press continuously for 5 seconds.
17.3.5 TIMER
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F).
o Press continuously for 10 seconds.
17.3.6 TEMP
To change remote control set temperature range from 16°C ~ 30°C (60°F ~ 86°F) to 20°C ~ 30°C (68°F ~ 86°F).
o Press continuously for 15 seconds.
To Next Page
Loading...
