107
14.13.3 Cancelling Duty Rotation
Cancelling Duty Rotation will end duty rotation operation and turn off main and sub units. To cancel duty rotation,
there are two methods:
A. Through Rotation ON/OFF Screen
Go to Main Menu → Function Setup → Duty rotation → Rotation ON/OFF. Select OFF and confirm to
cancel Duty Rotation and turn off units.
B. Through Operation Screen
1. Go to Operation Screen and press , , , or to show a pop-up window. Confirm “OFF”
will prompt a second pop-up window confirming turning OFF duty rotation.
2. Confirm “Yes” to cancel Duty Rotation and turn off units.
14.13.4 Changing Duty Rotation Interval
Duty rotation interval can be changed at any time when Duty rotation is ON or OFF:
1. Go to Main Menu → Function Setup → Duty rotation → Rotation interval
Default interval is 12 hours.
2. *Select Interval between 1 hour (minimum) to 23 hours (maximum) and confirm.
*Note: If Duty rotation interval is changed when Duty rotation is ON, the rotation counter will reset to the newly
confirmed interval.
14.13.5 Monitoring Duty Rotation
Using a status screen, duty rotation operation can be monitored to detect errors and check rotation interval.
1. Go to Main Menu → Function Setup → Duty rotation → Rotation status
2. Rotation status screen (during Duty Rotation = OFF). There are two pages:
3. Monitoring details A, B, C are described below:
A.
B.
C.
To Next Page
Loading...
Need help?
General
