Fitting the Camera on the AV
Cradle
Fitting the Camera on the AV Cradle eases charging.
The AV Cradle allows the Camera to be connected to
the external device, such as a TV in order for the
pictures on this Device to be viewed on the TV.
eThe charging configuration is the same as the one for 2 i/
connecting the DC Input Lead to the SD Video
\
Camera. (-_ 12)
1 Open the [MULTI] Cover. @
2 While pressing the Release Button, pull
out the tray.
3 Place the SD Video Camera on the AV
Cradle. 3
• If the DC Input Socket cover (_ is open, it is not
possible to fit the SD Video Camera on the AV
Cradle.
• The grooves O of the SD Video Camera fit in the
leading protrusions i_.
4 Push the tray until you hear it click.
5 Connect the DC Input Lead to the 4
[DC IN 4.9V] socket on the AV Cradle.
6 Connect the AC Cord to the AC Adaptor
and the AC Main socket.
• Power Lamp (_) flashes, and Charging starts.
• Whencamerarecharging,off.turn the power of the SD Video
• When recharging is completed, Power Lamp (_)
goes off.
• Be sure to turn the SD Video Camera off before
fitting it on the AV Cradle.
• If the AV Cable orAC Adaptor is connected to the SD
Video Camera, it is not possible to fit the SD Video
Camera on the AV Cradle.
Remove the SD Video Camera from the AV Cradle
While pressing the Release Button (_, pull out the tray
and remove the SD Video Camera _2_.
• For other notes, see page 79.
13
To Next Page
Loading...
