Digital Electronic Image
Stabilizer Function
If you are recording in unstable situations (with a Zoom
In, with a walk etc.) and the SD Video Camera is
shaky, you can use this function to correct for camera
shake.
elf the SD Video Camera shakes too much, this
function may not be able to stabilize images being
recorded.
Set the RecordingMode
1 Press the [MENU] Button and select [EIS]
on [Camera Functions Setup] to set [On].
eThe [((_1))]indication_._is displayed.
Canceling the Digital Electronic Image Stabilizer
• Set [EIS] on [Camera Functions Setup] to [Off].
• This function is memorized even if the SD Video
Camera turned off.
• Under fluorescent lighting, image brightness may
change.
Wind Noise Reduction
Function
This function reduces the noise that the wind makes as
it hits the microphone during recording.
MPEG2/MPEG4 Mode only
Set the RecordingMode
/ Press the [MENU] Button and select
[Wind Cut] on [Camera Functions Setup]
to set [On].
• The [WIND CUT] indication (_)is displayed.
Canceling the Wind Noise Reduction Function
• Set [Wind Cut] on [Camera Functions Setup] to [Off].
• This function is memorized even if the SD Video
Camera turned off.
tr_ MPEG2 Oil
OhOOmOOs
R OhO5m
8:00PM
Osc 20 2004
l m
I MPEG2 OIl
_ 0h0Om0Os
R OhOSm
8 :00_M
39
To Next Page
Loading...
