Recording pictures supplied
from an external device
1 Put the SD Video Camera in the AV Cradle
and connect with the AC Adaptor (_).
(-._ 13)
2 Connect the [AV IN/OUT] socket of the AV
Cradle to the AV Output Sockets of the
external device _) using supplied AV
Cable O-
eC): When not using the AV cradle.
eTurn off the SD Video Camera before connecting
the AV Cable.
3 Press the [REC/PLAY] Button to select
Recording Mode and set the operation
mode.
4 Select desired image quality.
(-_ 27, 28, 32)
5 Press the [MENU] Button and select
[Input Source] on [Record Functions
Setup] to [LINE] and then press the
[1_ SET] Button.
6 Set up the external device.
eTurn on the SD Video Camera.
eConfirm that the image or sound signal is input
into the SD Video Camera.
elf the image or sound signal is input, image is
displayed on the LCD Monitor and sound comes
from the speaker on the SD Video Camera.
7 Press the Recording Start/Stop Button.
• Recording starts.
• When the motion image is being recorded, press
the Recording Start/Stop Button again to stop
recording.
• If turning the power off, [LINE] change to [CAMERA].
• For other notes, see page 84.
DC IN 49V _ AV IN/0UT]2
_ I I==!
4 __,
55
To Next Page
Loading...
