Panasonic D-snap SV-AV100 - Starting the Software

Starting the Software /
==Starting the MediaStage for AV100 ...............................
/ Select [Start]>> [All programs
(programs)]>> [Panasonic]>>
[MediaStage]>> [MediaStage for AV100]. _ r*oo__...............................
• For other notes, see page 85. ............................
Disconnecting the USB Cable
safely
If you use Windows XP/2000, remove the USB Cable
using the following method.
If you use Windows Me/98SE, check that the Card
Access Lamp is out, then remove the USB Cable.
(Keep the SD Video Camera turned on.)
1
Double click the _ in task tray.
• Hardware disconnect dialog box appears.
"_ Select [Panasonic SD-Video CAMERA
USB Interface] and click [Stop].
3 Click [OK].
• Click [OK], and you can safely disconnect the
cable.
2
If you no longer need
software (Uninstall)
/ Select [Start] (>>[Settings]) >>[Control
Panel].
2 Double-click [Add/Remove Programs].
3 Select the software to be uninstalled and
click [Change/Remove].
3
• Uninstalling steps may vary depending on the OS.
Please refer to the user manual of your OS.
64