Setting Date and Time
At the time of purchase of the SD Video Camera,
the date and time are not set. First, set the date
and time, then use the SD Video Camera.
I Press the [REC/PLAY] Button to select
Recording Mode.
2 Press the [MENU] Button and select [Date
Setup] and then press the [1_ SET]
Button.
3 Select [Date Set] and press the [1_ SET]
Button.
4 Press the ! I/m/441/1_1_ side of the
Multi-function Button to set the desired
Date and Time.
• _1_1/1_1_: Select the item
• 11/11:Change the value
• Yearwill cycle in the order shown below.
2003, 2004, ..., 2079, 2003, ...
5 Press the [1_ SET] Button.
• A verification message appears.
6 Select [YES] and press the [1_ SET]
Button.
• If [NO] is selected, returns to step 4.
• For other notes, see page 79.
l_] MPEG2 @iN
I_I, OhOOmOOs
R Ohllm
12:OOAM
JAN 1 2003
[]
22
To Next Page
Loading...
