Panasonic Diga DMR-EZ37

40
RQT8849
Changing the Unit’s Settings
,  to select “Other Functions”
then
ENTER
,  to select “Setup” then
ENTER
Menus Items Options
Setup
Cable
Audio Language Setting
Channel Settings
Setup
Channnel
Disc
Video
Audio
Display
TV Screen
VHS
Signal Source (Antenna / RF IN)
Set Channels Automatically
Channel Settings
Closed Caption
,  to select a menu
then  to go to the item list.
,  to select an item to change
then
ENTER
,  to choose an option
then
ENTER
– Some options require different operations;
follow the on-screen prompts.
Accessing the Setup menu Summary of Settings
All factory default settings are indicated with “Underlined”
text.
Channel
Setup
Tips
To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change
is not activated until you press [ENTER].
To exit the screen
Press [RETURN] several times.
With the unit stopped
Notes
Changed settings remain intact even when switching the unit to
standby.
Signal Source (Antenna / RF IN)
Select to suit the type of antenna you are using.
[Antenna] [Cable]
Set Channels Automatically
Channel Settings ( 55)
Closed Caption ( 46)
[Set]: Choose whether to show closed captions.
[Analog]: Settings for closed captions in analog broadcasts.
[Digital]: Settings for closed captions in digital broadcasts.
[Digital Setting]: Detailed settings for closed captions.
[CC reset]: Resets settings for closed captions.
 For details ( 46, Setting the Closed Caption)
Audio Language Setting
Select the preferred digital broadcast language.
[English] [French] [Spanish]
Off Timer
Select how long the unit remains on when it is not being used.
[2 Hours] [6 Hours] [Off]
Remote Control Code ( 67)
[Set Code 1] [Set Code 2] [Set Code 3]
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically ( 57)
Set Clock Manually ( 54)
Set the time change dates for DST ( 57)
Set the beginning and end dates for DST.
Adjust Time Zone ( 57)
This corrects the time set in Auto Clock Setting.
The status is not displayed on the Setup menu when the Auto
Clock Setting is not set.
[1] [0] [1]
Quick Start
1 Sec. Quick Start for Recording on DVD-RAM.
From the power off state, recording on DVD-RAM starts about
1 second after fi rst pressing the [ DVD/VHS POWER] and then
sequentially pressing [REC] (Quick Start Mode).
Power consumption is also higher when the unit is turned off if this
is set to “On”.
[On] [Off]
Restore Default Settings
This returns Setup menus to default settings, except for the clock,
channel settings, ratings level, closed caption, and on-screen
language.
[Yes] [No]
M5821.indb40M5821.indb40 2007/05/2315:12:432007/05/2315:12:43