54
Display the Error History Display the Error History stored on the unit.
* If the current date or the date when the error
occurred is wrong, correct judgement may not
be made.
When the drive malfunction was
detected within 4 weeks ago. (*)
When the drive malfunction was
detected more than 4 weeks ago or
Drive last error data does not exist.
When HDD Self-Diagnosis test
result is NG.
When HDD Self-Diagnosis test
result is OK.
The Error History is not Data for
HDD and BD Drive.
The Error History is not Data.
HDD Self-Diagnosis test in process.
Press [6] [5] in service mode.
Save the error history to
SD card
The error and user operation history of the
remote control are saved to the SD card.
The SD card cannot be recognized
During saving
Save end
Press [6] [9] in service mode.
For usual recording,reg-
istration of additional
USB HDD
To register USB HDD for inspection.
(Special mode)
When USB HDD is in Special mode
(available for registered USB HDD):
When Special mode failure (USB-
HDD registration impossible):
Press [7] [4] in service mode.
* When releasing this mode, press
the [POWER] button of the unit or
Remote Control.
After releasing the special mode,
registration in the special mode is
cancelled.
Details are described in "3.1.3.1.
Registering the USB HDD".
Item
FL Display
Key Operation
Mode Name Description (Remote controller key)
To Next Page
Loading...
