Panasonic DMR-E20 - Connecting a video cassette recorder; When connecting to the L2 input terminals on the front of the unit; When connecting to the Input terminals on the rear of the unit

WhenconnectingtotheL2inputterminalsonthefrontoftheunit
Audio/Videocable
Yellow (VIDEO) __
White (L)
Red (R)
1
When connecting to the Input terminals on /
the rear of the unit
J
Audio/video cable
Yellow (VIDEO) _, t(
White (L) =[_]3}m3 I
Red (a)
Rear panel of this unit
S video cable !_ I l_J I!B
(not included)
AudioNideo cable Audio/Video cable g _ Bt_ S video cable
(not included) (not included) % (not included)
Other playback equipment
Connect to the video and audio
output terminals.
Other playback equipment
Connect to the video and audio output terminals.
E
_I[IRFJ
If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when connect-
ed through L/MONO.)
If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).