Panasonic DMR-E20 - Clock Settings

2.3-4-5
ACTION
2
Changing the unit's Settings
I Time Zone Adjust
Adjust the time zone (-1 or +1) if it was not set correctly with auto
clock setting.
You cannot change this setting il you set the clock manually.
I Press [ACTION].
The ACTION screen appears•
2
3
Use the joystick [<, I_] to select the
Set Up tab.
Use the joystick [A, V] to select
"Clock Settings" and press [ENTER].
4 Use the joystick [A, _I'] to select
"Time Zone Adjust" and press
[ENTER].
u_
V When you press [ENTER]
5
Use the joystick [&, _'] to select
"-1", "0", or "-I-1" and press
[ENTER].
The "Clock Settings" screen (m step 4) reappears.
II