Panasonic DMR-E20 - Channel Settings; Antenna System

DVD, TV
Preparation
Switch [DVD, TV} to =DVD".
I Antenna System
The following settings must be reset when you change the antenna
system.
VCR Plus+ guide channel settings (-, page 19)
Auto channel setting (.- page 91)
Channel captions (=, page 92)
1 Press [ACTION].
The ACTION screen appears.
2
3
Use the joystick [<, I_] to select the
Set Up tab.
Use the joystick [A, Y] to select
"Channel Settings" and press
[ENTER].
ACTION
I 2 4 Use the joystick [A, Y] to select
_=_ "Antenna System" and press
[ENTER].
5
Use the joystick [A, Y] to select "TV"
or "CATV" and press [ENTER].
TV: TV broadcast (2CH-69CH)
CATV: CATV broadcast (1CH- 125CH)
The screen shown in step 4 reappears.
|
6035