5.6
Changing the unit's settings
_) Use the joystick [A, _r] to select
the channel corresponding to the
caption and then move the joystick
[<].
• Channels are not displayed if they do not contain a
slation or if captions have been added manually.
Repeat steps (_) and 1_ as necessary.
5 llf you selected "Manual Channel Caption" I
5
6
®.@
t
<-O,1,
41,
Q Use the joystick [&, I'] to select
the channel and then move the
joystick [1_].
eChannels are not displayed if they do not contain a
station or if preset captions have been added.
(_ Use the joystick [A, I'] to select
the first character and then move
the joystick [1_].
You can choose from the following characters:
A-Z, 0-9, -, &, !,/, (space)
Repeat this step to enter the other characters.
Q Press [<1] to return to the Channel
Number column when you are
finished.
Repeat steps (_, _), and _ as necessary.
6 Press [ENTER].
The screen shown in step 4 reappears.
For your reference
In step 5-0, the screen scrolls a page at a time if you hold the joy-
stick up or down before pressing [ENTER].
eJ_j
RQT6(_3£,
To Next Page
Loading...
