Panasonic DMR-E55P

Item FL display Key
operation
Mode name Description (Remote
controller
RTSC Return in XP
(A & V)
L1 input signal is encoded (XP),
decoded (XP) and output
decoded signal to external
without DISC recording and DISC
playback.
Initial mode: EE2/ Interlace/
XP/ Audio 48kHz
Press [1] [3] in
service
mode.
Switch Interlace/
Progressive
Press [1] [4] in
RTSC
Return XP
mode.
*I/P are
switched
alternately.
Audio 44.1 kHz/ 48 kHz
Switch
Press [2] [4] in
RTSC
Return XP
mode.
*48 kHz / 44.1
kHz
switched
alternately.
I/P Switch Switch Interlace and Progressive
in EE mode.
*Initial setting is “Interlace”.
*This command is effective
during executing “White Picture
Output”, “MagentaPicture
Output” and “RTSC Return in XP
(A & V)” modes.
Initial mode is Interlace
Switch Interlace/
Progressive
Press [1] [4] in I
/
mode.
*I/P are
switched
alternately.
Audio Mute
(XTMUTE)
Check whether mute is applied
normally by the timer
microprocessor.
Press [2] [1] in
service
mode.
Audio Mute
(XDMUTE)
Check whether mute is applied
normally by the Digital P.C.B.
(GLUE IC).
Press [2] [2] in
service
mode.
Audio Pattern
Output
The audio pattern stored in the
internal memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching
operation of DAC can
beconfirmed by sub command [2]
[4].
Initial mode (Audio 48kHz) Press [2] [3] in
service
mode.
Audio 44.1kHz/48kHz
switching
Press [2] [4] in
Audio
Pattern Output
mode.
*48 kHz / 44.1
kHz
switched
alternately.
20