60
RQT8033
Convenient
functions
Changing the unit’s settings
Refer to the control reference at the bottom of page 56.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others”
and press [ENTER].
3 Press [3, 4] to select “SETUP” and
press [ENTER].
4 Press [3, 4] to select “Tuning” and
press [1].
You can add or delete channels, or change programme positions.
5 Press [3, 4] to select “Manual” and
press [ENTER].
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press [A].
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press [B].
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press
[C].
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [ENTER].
[Note]
If Preset Download (➡ 19) has been performed, only deletion of the
programme position can be performed.
∫ To change the tuning settings for individual
programme position
6 Press [3, 4, 2, 1]
to select a
programme position
and press [ENTER].
Press [3, 4] to select an item and press [1].
You can restart auto channel setting if Preset Download or Auto-
Setup (➡ 19, 20) fails for some reason.
After performing steps 1–4 (➡ left)
∫ Auto-Setup Restart
5 Press [3, 4] to select “Auto-Setup
Restart” and press [ENTER].
6 Press [2, 1] to select “Yes” and
press [ENTER].
Auto-Setup starts.
∫ Download from TV
5 Press [3, 4] to select “Download
from TV” and press [ENTER].
6 Press [2, 1] to select “Yes” and
press [ENTER].
Downloading from the television starts.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Tuning
Manual
SETUP
Disc
Tuning
Manual
Auto-Setup Restart
Download from TV
Manual Tuning
Pos
Name
Ch
Pos
Name
Ch
Delete
Add
Move
1 BBC1 4
2 BBC2 2
3 ITV 5
4 CH4
8
5 CH5 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
ENTER
RETURN
SELECT
A
C
B
Pos
Name
Channel
NICAM
Title Page
1
301
4
Auto
RETURN : leave
Manual
Tuning
BBC
RETURN
SELECT
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [ENTER].
If the station name needs a blank space, select
the blank between “Z” and “¢”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[ENTER].
NICAM To select the type of sound to be recorded
Press [3, 4] to select “Auto” and press [ENTER].
≥Select “Off” if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is
distorted due to inferior reception conditions.
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [ENTER].
≥To find the correct title page for the station, refer
to its Teletext TV guide.
≥The unit’s clock must be set correctly.
Auto-Setup Restart, Download from TV
EH50.book Page 60 Tuesday, July 5, 2005 11:03 AM
To Next Page
Loading...
