Panasonic DMR-EZ49VEB

20
NO READ Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
“Cannot read.
Please check the
disc.”
HARD
ERR
Drive error The drive detected a hard error. “DVD drive error.” Display for 5 seconds.
The character indication flows side-
ways.
SELF
CHECK
Restoration operation Since the power cord fell out during a
power failure or operation, it is under resto-
ration operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there
is the possibility that defective Digital P.C.B.
/ DVD drive.
No display
The character indication flows side-
ways.
PLEASE
WAIT
Unit is in termination process Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON,
it is displayed in restoration operation for
AC off.
No display
The character indication flows side-
ways.
UNFOR-
MAT
Unformatted disc error You have inserted an unformatted DVD-
RAM or DVD-RW that is unformatted or
recorded on other equipment.
The character indication flows side-
ways.
IR ERR IR communication error [IR ERR] is displayed when communication
between Timer microprocessor and IR
microprocessor fails.
No display
No REC Recording is impossible [No REC] is displayed when recording is
impossible due to the defect, dirt or wound
of media.
No display
Error Code Diagnosis contents Description Monitor Display Automatic FL display