Editing video
VQT3F57
46
Editing recorded titles
1 Select “Partial Delete” in “Edit”, then
press [OK].
2 Press [OK] at the start point and end point
to delete.
≥Press [PLAY/a1.3 1] to start the playback when
the title is paused.
3 Select “Continue”, then press [OK].
≥Select “Next”, then press [OK] to delete other
sections. Up to 20 sections can be set.
(> go to step 2)
4 Select “Delete”, then press [OK].
≥Chapter Mark is generated in the scene that was
partially deleted.
5 Press [BACK/RETURN ].
≥ You can find the desired point by using search function,
etc.
≥ You cannot set points if they are too close to each other.
You cannot set an end point before a start point.
1 Select “Divide Title” in “Edit”, then press
[OK].
2 Press [OK] at the point to divide the title.
≥To confirm the division point
Select “Preview”, then press [OK]. (The unit plays
10 seconds before and after the division point.)
≥To change the division point
Restart play and select “Divide”, then press [OK]
at the division point.
3 Select “Continue”, then press [OK].
4 Select “Divide”, then press [OK].
≥ Video and audio just before and after the division point
may momentarily cut out.
≥ Divided titles form a group of titles.
≥ You can find the desired point by using search function,
etc.
Partial deleting
Start
Next
Continue
0:00.00
End
: . : .
Start End
Please set the start
point with playback
operation and skip.
OK
RETURN
Monster
Dividing title
Divide
Preview
Continue
0:00.22
Divide
OK
RETURN
Monster
PLAY
: .
DMR-HW100EB-VQT3F57_eng.book 46 ページ ２０１１年８月５日 金曜日 午後２時４分
To Next Page
Loading...
