14
Getting To Know Your Machine
Mode Setting
Changing the Modes
Any function can be started by first pressing and then entering the function number, or by pressing
or scroll key repeatedly until the desired function appears on the display.
NOTE
1. If Fax Parameter No. 140 is not preset to "Valid" position, which enables you to use its
function, the display will not show the function. (See page 146)
2. These functions are available when the optional Keyboard (DA-KB180) is installed.
FUNCTION
2
1
3
6
If set on other
function mode.
Deferred Communication
1 = Deferred XMT (see page 30)
2 = Deferred Polling (see page 30)
3 = Advanced Communication
Advanced Communication
2 = Confidential Communication (see page 74)
4 = Sub-Address XMT (see page 82)
5 = LAN Relay XMT (see Note 1) (see page 126)
Polling
1 = Polling (see page 36)
2 = Polled (see page 34)
Print Out
1 = Journal (Print/View) (see page 162)
2 = One-Touch (see Note 2)/Abbreviated/
Directory Search List (see page 166)
3 = Program List (see Note 2) (see page 168)
4 = Fax Parameter List (see page 170)
6 = Individual XMT Journal
7 = Directory Sheet (see page 138)
To Next Page
Loading...
