142
Setting Your Machine
Fax Parameters
General Description
Your machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter Table, are preset
for you and do not need to be changed. If you do want to make a change, read the table carefully. Some parameters,
such as the Resolution and Contrast parameters, can be temporarily changed by simple key operation just before a
transmission is made. When the transmission ends, however, these parameters return to their preset values (Home
position). Other parameters can only be changed by the procedure described below.
Setting the Fax Parameters
NOTE
1. To scroll the Fax Parameters in Step 3, press or .
2. To print out a Fax Parameter List, see page 170.
2
1
6
FAX PARAMETER(1-182)
NO.=
04 STAMP(HOME)
2:ON
To set another parameter, press
to return to Step 3 or press to
return to standby.
CLEAR
STOP
3
Enter Fax Parameter number from
the Parameter Table.
Ex:
0 0 4
If set on other
function mode.
To Next Page
Loading...
