Panasonic DP-1820P

90
Advanced Facsimile Features
Receive To Memory
NOTE
1. When the memory overflows, the machine will stop receiving and release the line. The
machine will not answer the next incoming call until there is space available in memory.
2. We recommend that optional flash memory card is installed when this function is used. See
page 184 on Image Memory Capacity.
3. If the password has not been set, your machine will not prompt you to enter the password. The
document(s) will be printed immediately after pressing
in Step 4.
This feature is used to secure all
received documents by storing
them into memory. To print the
document(s) received in memory,
the authorized operator must
enter the correct password.
 Setting RCV To Memory Password
 Setting the RCV To Memory
 Printing Documents
After receiving documents with the Receive To Memory feature, the following
message will appear on the display.
aaa bbb ccc
aaa
bbb
ccc
Memory
2
1
37 RCV TO MEMORY
1234
5
If set on other
function mode.
1
2
If set on other
function mode.
MESSAGE IN MEMORY
< RCV TO MEMORY >
2
1
If set on other
function mode.
SET