173
Problem Solving
Communication No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.
16
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting. (Fax Parameter No. 17)
3. If the Fax Parameter No. 13 (AUTO JRNL PRINT) is set to
"Valid" (default setting) and the machine is printing the
received document(s) from memory, which also happens to
be the 200th transaction, the machine will not auto answer
until the Transaction Journal completes printing.
16
28
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
174
No Unit Operation No unit operation To reset the machine, turn "Off" the Power Switch for a few
seconds then turn it "On" again.
16
Mode Symptom Possible Cause / Action Page
To Next Page
Loading...
