Panasonic DP-190 - Page 71

71
UF-9000
JUN 2004
Ver. 2.0
DP-180/190
4.1.7. F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press “SET” key.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
19 Scanner Count Total count of scanning operations.
20 Scanner Read Count Total count of scanner readings.
21 Copy Print Count Total count of copies printed.
22 Copy Scan Count Total count of copies scanned.
23 PC Print Count Total count printed from PC.
24 PC Scan Count Total count scanned to PC.
25 Fax Transmit Count Total count of Fax transmitted.
26 Fax Receive Count Total count of Fax received.
27 Fax Print Count Total count of Fax printed.
28-29 Not Used
30 A4R / LETTER R Count Total count of A4-R / Letter-R Print.
31 Not Used
32 FLS / LEGAL Count Total count of FLS / Legal Print.
99 All Counter Clear All counters are cleared.
F8 Mode
No. Item Remarks
00-05 Not Used
06 Error Log View a) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
07 Error Log Clear a) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
08 (Factory use only) Lock operation for Scanner Unit.
09-17 Not Used
18 C18 PRT PWM ADJ.PTN.
(LSU PWM Pattern)
Print out the Test Pattern.
Proceed when the LSU is replaced.
F7 Mode
No. Item Remarks