388
DP-2330/3030
MAR 2005
Ver.2.1
DP-2310/3010
(10) Disconnect the Harness.
(11) Loosen 1 Screw.
(12) Slide the Process Unit out.
Caution:
To prevent damage to the Process Unit, ensure
the Right Cover is still open before pulling the
Process Unit out.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light (even if
it is a 1000-Lux fluorescent lamp).
(13) Slide the 1st Paper Tray out.
(14) Remove 3 Screws.
(15) Remove the Front Left Cover.
(16) Remove the Blind Cover.
(17) Remove 2 Screws.
(18) Remove the S Inner Cover.
To Next Page
