Panasonic DP-3010 - Disassembly and Assembly; Removing Finisher Cover Assembly

441
DP-2330/3030
MAR 2005
Ver. 2.1
DP-2310/3010
11.2.3. Disassembly and Assembly
<Removing Finisher Cover Assembly>
(1) Open and hold the Finisher Cover (2608).
(2) Release the Front and Rear Arms (2609 and
2610).
(3) Release the Rear Latch and remove the
Finisher Cover (2608).
(4) Remove 1 Screw (2633).
(5) Remove the Front Cover Assembly (2601).
Note:
When reinstalling the Cover, make sure 1 Latch
Hook is in the hole and the Release Lever works
correctly.
(6) Remove 1 Screw (2521).
(7) Remove the Rear Cover Assembly (2605).
Note:
When reinstalling the Cover, make sure 2 Latch
Hooks are in the holes.
<Removing Finisher Tray Cover Assembly>
(8) Remove 2 Screws (2521).
(9) Remove the Tray Assembly (2515).