Panasonic DP-C262 - Page 72

72
TroubleshootingTroubleshooting
Print Parameter Error(006) Specied the hole punch
position ( Output tab).
However, the Punch Unit is
not installed on the machine.
Verify the settings on the Device tab.
Click the
Auto Configuration
button to congure
the settings properly when your machine is
connected to the network.
When your machine is connected with USB
cable, set the Punch Unit on the Device tab
correctly.
Print Parameter Error(101) Specied a Paper
Source unable to print in
Duplex.(Basic Tab)
(Duplex printing is not
possible from the tray
set with A5 in Landscape
format)
Specify the tray set with the A5 in portrait format.
Select Automatically Select on the Paper
Source menu.
Print Parameter Error(104) Specied a Paper Source
unable to shift sort.
(Basic Tab & Output Tab)
- Only when 1 Bin Finisher
(DA-FS320) is in use.
- It is not possible to shift
sort with B5 in portrait
format.
Specify the tray set with the B5 in Landscape
format.
Click the
Auto Configuration
button to congure
the settings properly when your machine is
connected to the network.
Print Parameter Error(106)
Print Parameter Error(107)
Specied a wrong Paper
Source when printing a
document with stapling.
Verify the settings on the Device tab.
Click the
Auto Configuration
button to congure
the settings properly when your machine is
connected to the network.
When your machine is connected with USB
cable, set the Finisher on the Device tab
correctly.
Select Automatically Select on the Paper
Source menu.
Error Messages Possible Cause Solution(s)
Print Parameter Error(108)
Print Parameter Error(109)
Specied a wrong Paper
Source when printing a
document with punching.
Verify the settings on the Device tab.
Click the
Auto Configuration
button to congure
the settings properly when your machine is
connected to the network.
When your machine is connected with USB
cable, set the Punch Unit on the Device tab
correctly.
Select Automatically Select on the Paper
Source menu.
Print Parameter Error(119) Specied a wrong Media
Type when printing a
document with Rotate sorting.
Verify the Media Type setting on your machine.
Select the same media type on the Basic tab as
set on your machine.