Panasonic DP-C262 - Basic Tab

16
17
Conguring
the Printer Driver
Settings
Conguring
the Printer Driver
Settings
Basic Tab
Basic tab is used for conguring basic printing settings.
1
6
2
3
4
5
7
11
12
13
14
8
9
10
1. Paper Size
Displays the current Paper Size and Output
Paper Size settings.
2. Paper Image
Represents the current settings, along with the
icons shown below.
3. Icons
Represent the current settings, along with the
paper image shown above.
4.
Printer Status...
button
Used to check the printer status, launch the
Device Monitor, which displays the status.
This feature is only available when the printer is
connected over a TCP/IP network.
5.
Restore All Defaults
button
Restores all the settings to the default value.
6. Paper Size/Output Paper Size
There are two settings for paper size. They are
Paper Size and Output Paper Size.
Paper Size denotes the document size created
by the software applications.
Output Paper Size denotes the size of paper
used by the printer.
Custom paper sizes can be selected in the
Paper Size and Output Paper Size settings.
Note:
Choosing envelope paper sizes, automatically
switches the
Media Type
to
Envelope
.
The
Media Type
and
Paper Source
settings defer
depending on the
Paper Size
setting.
7.
Custom Paper...
button
You can create, edit and delete custom papers.
Up to 50 custom papers can be registered.
Note:
Custom paper size is saved for individual users who
are logged on.
The saved Custom Papers will not be delated when
the PCL Driver is uninstalled. The Custom Paper
les will automatically be recognized if the PCL
Driver is installed again.
Use Long Paper
Creates Long Paper as a custom paper size.
Choose from the following paper sizes for long paper.
Width: 8.27 - 11.69 in.(210.0 - 297.0 mm)
Length: 18.01 - 35.43 in.(457.3 - 900.0 mm)