Panasonic DP-C262 - Troubleshooting; Printing Operation Failure

68
TroubleshootingTroubleshooting
Printing Operation Failure
If the printing operation fails, check the following items rst:
The connecting cable (USB or Ethernet LAN cable) is properly connected.
Power of the device is turned ON.
Paper is loaded properly in the device.
An error message is not displayed on the device. (See Note)
The above points can be veried by printing a test page. Refer to the following pages for the procedures on
test page printing:
Windows 98/Windows Me
Windows NT 4.0 [General] (See page 10)
[General] (See page 8)
Windows 2000/Windows XP/Windows Server 2003 [General] (See page 13)
NOTE
The status of the devices can be veried by the
Device Monitor
.
Refer to the Operating Instructions (For Device Monitor).