Panasonic DP-C262 - Device Tab

48
49
Conguring
the Printer Driver
Settings
Conguring
the Printer Driver
Settings
Device Tab
Used for conguring optional devices installed on the printer.
If the printer is connected to the Network (TCP/IP), use Auto Conguration to congure the optional devices
installed on the printer or obtain information on the printer driver settings.
1. Number of Paper Tray
Species the number of paper trays installed on
the device.
2. Duplex Unit
Select Installed if a duplex unit is installed.
3. HDD Unit
Select Installed if a hard disk drive is installed.
4. Printer Memory
Select and specify the total amount of memory
installed on the printer (standard + optional
memory).
5. Finisher
If the printer is equipped with a Finisher, select
it from the list.
6. Punch Unit
Select Installed if a Punch Unit is installed.
7. Department Counter Mode
Select On if the printer is setup to operate in the
Department Counter Mode.