109
KX-MB2230EU/ KX-MB2270EU/ KX-MB2515EU/ KX-MB2545EU/ KX-MB2575EU/ DP-MB310EU
6.20.3. Scanning (ADF) (Only for KX-MB25** and DP-MB***)
6.20.3.1. General
This Auto Document Feeder (ADF) can read double side documents as well as single side documents.
ADF motor supplies all power to rotate the rollers.
Switchback solenoid is provided to change the rotation direction of Exit Roller.
When switchback solenoid is OFF, Exit roller rotates toward the paper eject, and when ON, rotates reverse direction.
6.20.3.1.1. Single side Scanning
• DOCUMENT TRANSMISSION (ADF)
The frictional force between SEPARATION ROLLER (DOC.)and SEPARATION RUBBER makes PICK UP ROLLER (DOC.)
move downward from standby position to pick up paper.
Pick-upped paper is separated by SEPARATION ROLLER (DOC.) and SEPARATION RUBBER (DOC.), and then fed by FEED
ROLLER (DOC.).
After being read by CIS, the paper is ejected by ROLLER DOC EJECT.
Switchback path switching solenoid and switchback solenoid is always OFF.
• DOCUMENT TRANSMISSION (SCANNER GLASS)
CIS Module is carried by the belt timing along the shaft carriage to the reading start position.
Then it goes back to the home position reading the document through the glass.
Separation Roller
Pickupn Roller
Document Feed Roller
CIS
Document Feed Roller
Document Feed Roller
Swichback Roller
To Next Page
Loading...
