Panasonic DP-MB310EU

307
KX-MB2230EU/ KX-MB2270EU/ KX-MB2515EU/ KX-MB2545EU/ KX-MB2575EU/ DP-MB310EU
14.4.2. Wire dressing on the Left Side Section(Main Board)(1)
Core can not be placed on the PCB.
Pass the LEAD through
the main chassis boss. (4 points)
*USB Connector is inserted after assemble ADF.
Pass the Lead through the main chassis boss.
*Do not contact Lead of USB and Lead of ADF RELAY.
Main PCB
Cover PSU
< FG Lead terminal direction >
Pass through 3 times,
wind 2 times to core.
< Core attachment to LEAD of DC Motor >
(Main PCB side)
50 ~ 60 mm