119
KX-MB2230EU/ KX-MB2270EU/ KX-MB2515EU/ KX-MB2545EU/ KX-MB2575EU/ DP-MB310EU
• If necessary, slide the recording paper guides to adjust the width to
the size of the recording paper.
• Make sure that the recording paper is under the paper limit mark
(1), and the paper should not be loaded over the snubbers (2).
5.
Insert the Standard input tray into the unit, lifting the
front part of the tray. Then push it completely into the
unit.
Note:
• If the paper is not loaded correctly, re-adjust the paper guides, or
the paper may jam.
• If the Standard input tray does not close, the plate in the Standard
input tray may not be in the locked position. Push the paper down
and make sure that the paper is laying flat in the standard input tray.
To Next Page
Loading...
