Panasonic DP-MB310EU - Page 121

121
KX-MB2230EU/ KX-MB2270EU/ KX-MB2515EU/ KX-MB2545EU/ KX-MB2575EU/ DP-MB310EU
8.1.2.2. Manual tray/Multi-purpose tray
• When printing from a computer, custom size recording paper can also be used.
• The unit is set for printing A4-size plain paper by default.
- To use other paper sizes, change the recording paper size setting (feature #381).
- To use other paper types, change the recording paper type setting (feature #384).
• To print from the manual tray/multi-purpose tray, change the paper tray setting beforehand.
- Select “#2” for the printer properties when printing with the computer.
- Set the copy input tray setting to “#2” (feature #460) when making a copy.
Manual tray
It can hold one sheet at a time. When printing or copying multiple sheets, add the next sheet after the first sheet has been fed into
the unit.
Important:
• To print on thick paper, label, envelope or Japan postcard:
- Be sure to open the rear cover before starting and print
one sheet at a time. The recording paper will be printed
out from the rear side. Therefore, if you print with the
cover closed, the paper may jam inside the unit.
- Be sure to close the rear cover after printing.
1.
Adjust the width of the guides (1) to the size of the recording paper.
• If the unit is in sleep mode, press a key to put the unit in standby
mode for the next process.
2.
Insert the paper, print-side up (2) until the unit grasps the paper and a
single beep is heard.
Note:
• The manual tray cannot be used for receiving faxes.
• If the copy input tray setting (feature #460) is not set
“#2” before-
hand, when printing or copying multiple pages, the 1st page will be
printed from the manual tray, but the rest of the pages will be
printed from the standard input tray.