Panasonic DVD-A7

I Audio settings
f
II
Digital Audio Output
You must change the digital output signal
settings on this unit to suit the kind of
equipment you have connected.
• PCM Down Converslen
Choose whether or not to convert the
96 kHz signals contained on DVD-Video to
48 kHz/16 bit
• Dolby Digital
Choose whether to output Dolby Digital
signals as they are (bitstream) or to
convert them to PCM 2 channel signals so
audio can be heard without passing
through a decoder.
• DTS Digital Surround
The same choices are available with dts
as are available for Dolby Digital.
_oo
_oo
,oo
IDD_
ACTION
ACTION
While stopped, press
[ACTION].
82 P_tings LeVel 8 i_
_133 Menu Language Eng_stl
4 On.Screen M_ages
5 FL Display 8righl
_,, 6 _ Aspect 4:3
7 Dig=tar Audio Outoul
_,. 8 _aker Se_Jng Mul_i_hannel
g Other Sailings
press RETURN to exit
Initial settings screen
Caution for the optical/coaxial dig'it'al audio output
connector:
EnsureDolbyDigitaland DTSare set to "PCM"ityouconnectthisunitto a
digitalamplifierwithouta decoder.If thesignalsare outputas bitstream,
"noise"willbeoutput,whichcancauseharmtoyourearsandspeakers.
To return to the previous menu
Press [RETURN].
VOT8354