Panasonic DVD-A7

i Theremote control
R6/LR6, AA, UM-3
Remote control signal sensor
• "q _ -
Transmission --
window
About 23 feet (7 meters) in
front of the signal sensor
o,°*o° ...... °*°o°*°.°o°o.°,°o°o,o.o,°o*°.o*°,°o, ..... ,oo.°.
How to open the remote control cover
_ Press gently on the
arrow and slide down,
I
[ Useof batteries J
• A_ign the poles (+ and -) properly when inserting the batteries. I
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries
• DO not heat or disassemble the batteries. DO not allow them to
contact flame or water.
• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necklaces ,_
ib
• Do not use rechargeable type batteries ¢Q
• Do not use batteries if the covering has been peeIed off.
Mishandling of b&tteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrotyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Operation notes 1
• Do not place obstacles between the remote control signal sensor
and remote control unit.
• Do not expose the remote control signal sensor to direct sunlight
or to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
• If this system is installed in a rack with glass doors, the glass
doors' thickness or color might make it necessary to use the
remote control a shorter distance from the system.
I To prevent damage
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.
VQT8354