For Your Reference
37
RQT6050
Watching video from a video camera
1 Connect the video camera to this unit.
2 Press [DVD/AUX] to select “AUX”.
Note
≥“AUX” mode is canceled when this unit is turned off.
≥Auto standby function (➡ page 14) does not work while the “AUX” mode is on. Turn the
unit off when you have finished using it.
Using an optional battery pack: Part number CGP-H501
(yellow)
(yellow)
(black)
(white)
(red)
Audio/video cable
(included)
This unit (Right side)
Video camera
Use together with built-in battery.
Charge the battery pack before using it for
the first time.
∫ To attach
∫
1 Confirm that the marks on the bottom
of the unit and battery match.
∫ Approximate recharging and play
times
(Actual times depend on operating
conditions.)
∫ Fit the battery pack firmly so it clicks into
place.
∫ To recharge (When the unit is off)
Connect to the household mains socket
while the battery pack is attached
(➡ page 12).
≥To confirm the charge (➡ page 13).
≥Press [DISPLAY].
≥If the unit is not to be used for a long time,
detach the battery pack (➡ page 13).
Recharging is complete when [CHG]
goes out. (The [Í] indicator lights.)
Disconnect the AC mains lead and AC
adaptor.
Note
Refer to “Precautions” on page 8.
≥Brightness is factory preset to “0”.
≥
To change the LCD brightness (
➡
page 21).
∫ To detach
1 Slide the latch and hold in position.
Recharging
[at 20 oC]
10 hours
10 hours
10 hours
LCD
brightness
level
j5
0
5
LCD on
8 hours
6 hours
30 minutes
5 hours
LCD off
11 hours
30 minutes
11 hours
30 minutes
11 hours
30 minutes
Play time
To Next Page
Loading...
