Panasonic EB-GD87 - Call Charges; Setting the Unit Price

GPRS Call Duration
Use the Connections submenu to display information as
follows:
Ø
Last Connection - displays the duration and amount of
data transfer of the last call. Times are indicated as: hours
(0-99), minutes (0-59), seconds (0-59) - HH:MM:SS.
Ø
All Connections - displays the accumulated duration and
amount of data transfer. The lock code or PIN2 is required
to reset the timer.
Ø
Call Priority - determines whether an incoming voice call
should interrupt a data call. Select between On and Off.
From Idle mode:
Note: The Connections function is SIM dependent.
Call Charges
To maintain control over the cost of calls that are made, the
phone can be set to restrict use to a finite number of units
overall.
Setting the Unit Price
Firstly, a price per unit must be entered. This is the cost that the
Service Provider charges for one unit of call time.
From Idle mode:
Note: The “Service Charges” function is SIM/Service provider
dependent
Call Information
63
Call Information
Phone Option >
Call Service >
Connections
Select
function
Phone Option >
Call Service >
Service Charges >
Price Unit
x2
Enter currency
unit (max. 3
characters)
Enter security
code
x2
Enter unit
price
x2