Panasonic Elite Big PAC-i U-200PZH2E8 - Page 274

77
<Procedure of CZ-RTC5B>
1
Keep pressing the , and
buttons simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the
LCD display.
3
Press the
4
There are four patterns of operational status display as shown below.
(1) Under normal operation
State of no energy-saving operation
or button to see each
menu.
Select “Status info.” on the LCD display and
press the
button.
Check of ECONAVI Operational Status
The status of ECONAVI operation can be checked instantly.
It is available to check the operation when installing the indoor unit.
2
Select “0. ECONAVI info.” on the LCD display and
press the button.
(2) Under temperature shift
State of energy-saving
(temperature shift) operation
(4) Under sensor communication error
Shows that the connected
ECONAVI sensor is in error state.
(3) Under suspension with absentee
State of energy-saving (suspended)
operation
*Shows that air conditioner operation was
suspended because no person was detected
for a certain period.
This state remains until operation is restarted.
20:30 (THU)
Status info.
[ ] Close
ECONAVI
Status
ON
Normal
Maintenance func
Sel. Page [ ] Confirm
20:30 (THU)
0. ECONAVI info.
1. Outdoor unit error data
2. Service contact
3. RC setting mode
ECONAVI info.
Sel. [ ] Check
20:30 (THU)
Setting info.
Sensor unit info.
System settings
Status info.
Status info. 20:30 (THU)
[ ] Close
ECONAVI
Status
ON
Normal
Status info. 20:30 (THU)
[ ] Close
ECONAVI
Status
ON
Shift
Status info. 20:30 (THU)
[ ] Close
ECONAVI
Status
ON
Vacant
Status info. 20:30 (THU)
[ ] Close
ECONAVI
Status
ON
Error
Fig. 7-13
7-24
SM830276-00_欧州向け R32シングル TD＆SM.indb 24 19/02/28 13:33:43