6-8
66
6-4. Monitoring Operations: Display of Indoor Unit and Outdoor Unit Sensor Temperatures
<Operating procedure>
(1) Press and hold the (Check) button and
buttons simultaneously for 4 seconds or longer to
engage temperature monitor mode.
During temperature monitoring,
is illuminates.
(The display and operations are the same as
for monitor mode using the indoor unit remote
controller.)
(2) Press the
button and select the indoor unit to
monitor.
(3) Press the temperature setting
and buttons
and select the item code of the temperature to
monitor.
The unit No. of the selected indoor unit, and the
temperature data, are displayed.
(4) To end monitoring, press the
(Check) button.
The display returns to the normal display.
NOTE
The display does not blink.
(3)
(2)
(1)
(4)
A
SM830276-00_欧州向け R32シングル TD＆SM.indb 8 19/02/12 15:38:58
To Next Page
Loading...
