1-12-1-1-9
1
3. SELECTING THE LOCATION FOR INSTALLATION SERVICE
Please secure necessary space to guarantee performance and service & maintenance.
For multiple installations, please secure enough space to enable removal of side face screws between units. (unit:mm)
The below mentioned distance is required for optimal unit performance.
Allow as much space as possible in order to obtain the best performance from the units.
(A) If there are obstacles at the intake
If the upper part is open
(1) For separate installation location
• Only if there are obstacles at the intake
• If there are obstacles on both sides
(2) For multiple units (more than 2 units)
• If there are obstacles on both sides
More
than 150
More
than 200
More
than 250
More
than 150
More
than 250
More than
150
More than 250
More than
200
If there are obstacles above the unit
(1) For separate installation location
• Only if there are obstacles at the intake
(B) If there are obstacles at the discharge
If the upper part is open
(1) For separate installation location
(2) For multiple units (more than 2 units)
More than
300
More than
100
More than 500
More than 1500
More than 150
(C) If there are obstacles on both the intake and discharge
If there is an obstacle that is higher than the unit on the intake side.
(There is no limit to the height of the obstacle above the discharge.)
(D) For multiple row installation (on the roof, etc.)
(1) For one row installation setup
More than
2000
More
than 1500
More
than 300
More
than 300
If the upper part is open
(1) For separate installation location (2) For multiple units (more than 2 units)
More than
150
More than
1000
More than
1500
More
than 300
SM830276-00_欧州向け R32シングル TD＆SM.indb 9 2019/02/27 11:54:27
To Next Page
Loading...
