4
Connecting to the network through LAN interface
NETWORK
NETWORK
WAN
3
2
1
LAN
LAN cable (sold separately)
Internet
Modem
Router
Computer
When connecting this receiver to a wireless LAN router by Wi-Fi, refer to the “Basic Setup”
→
“Setting by referring to the
operating instructions”
→
“Setting network connection” in the CD-ROM’s operating instructions.
Plugging in the receiver
After connecting to a LAN, connect the power cord of the
receiver to a power outlet.
1
Plug the supplied power cord into the AC IN socket on the
back of the receiver.
2
Plug the other end into a power outlet.
Turning the power on
Press
STANDBY/ON
to switch on the receiver and your
computer.
Wait a few minutes after turning the power on before
performing the following operation.
STANDBY/ON
If you have a Mac/PC
To Next Page
Loading...
