6
Placing the Speakers
SBR
TMdL TMdR
SBL
SRSL
R
SW
C
L
L
– Front Left
C
– Center
R
– Front Right
SL
– Surround Left
SR
– Surround Right
SBL
– Surround back Left
SBR
– Surround back Right
TMdL
– Top middle Left
TMdR
– Top middle Right
SW
– Subwoofer
Notes
• There are also other speaker connection
patterns (front wide, etc.). For details, see
“Connecting your equipment” of the operating
instructions.
• To play Dolby Atmos, you need to connect the
speaker of either the Top middle, Surround
back, or Front wide.
• When both top middle and surround back are
connected, sounds will come out from either
one of the speakers according to the listening
mode etc.
• The Dolby Enabled Speaker can be used in
place of the Top middle speaker. Refer to the
operating instructions for details.
Connecting up
Follow the booklet instructions to perform connection and initial settings
To Next Page
Loading...
