9
Thru-beam type: EX-19□, parallel deviation diagram (typical)
(
ℓ5
)
(
L5
)
200 100 0 100 200
0
1
0.5
Sensing distance L (m)
CenterLeft
Right
Operating point ℓ(mm)
<Installation interval for EX-19□>
In case using at sensing distance (L5) 1m,
the operation point (ℓ5) is approx. 128.6mm
according to diagram above.
The installation interval is
Approx. 128.6mm × 2 = approx. 257.2mm
Thus, install approx. 257.2 or more away.
Emitter Receiver
EX-19□: approx. 257.2mm or more
1m
EX-19□: approx. 257.2mm or more
Thru-beam type: EX-19E□, parallel deviation diagram (typical)
(
ℓ6
)
(
L6
)
200 100 0 100 200
0
1
0.5
Sensing distance L (m)
CenterLeft
Right
Operating point ℓ(mm)
<Installation interval for EX-19E□>
In case using at sensing distance (L6) 1m,
the operation point (ℓ6) is approx. 71.1mm
according to diagram above.
The installation interval is
Approx. 71.1mm × 2 = approx. 142.2mm
Thus, install approx.142.2 or more away.
EX-19E□
：
approx.142.2mm or more
EX-19E□
：
approx.142.2mm or more
1m
Emitter Receiver
info@digiparts.ch
www.digiparts.ch
Ihr Schweizer Industriepartner
To Next Page
Loading...
